Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Highlands and Islands · IV2

Stair, Lobby & Corridor Glazing for Inverness buildings

From the IV2 district outwards, we arrange fire-rated escape route glazing for buildings across Inverness, matching glass, frames and seals to tested evidence rather than guesswork.

E 30 – EI 60IV2Scotland

Quote for Inverness

Tell us what you need. We reply with next steps and a guide price.

What's involved with fire-rated escape route glazing in Inverness

Escape route glazing is fire-rated glass in the walls and doors of protected stairs, lobbies and corridors, the routes people rely on to leave a building safely. It has to hold back fire and smoke for the rated time, and on many routes it has to keep heat away from people passing it as well.

  • Stair enclosure screens
  • Evidence for the fire safety file
  • Lobby and corridor screens with doors
  • Smoke seals and closers on doors

Before you order fire-rated escape route glazing: what matters

Vision through doors

Corridor subdivision doors and double-swing doors normally need vision panels so people do not collide.

Keep routes clear

We plan installation so escape routes stay available while the building is occupied, or agree temporary arrangements with whoever is responsible for fire safety in the building.

Integrity versus insulation

Building guidance limits the amount and position of integrity-only glass on protected routes because people may need to pass close to it while fire is on the other side. Insulating glass removes most of those limits.

Which rules apply to fire-rated escape route glazing in Inverness?

Scotland Which rules apply?

In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.

For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.

Inverness coverage and nearby towns

Coverage around Inverness includes the IV2, IV1, IV3 districts and nearby Elgin, Perth, Aberdeen. Inverness is the main town we cover in Highlands and Islands.

What you can expect in Inverness

Rated systems, not just rated glass

Every quote in Inverness identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Honest about unknowns

If an existing frame in a Inverness building has no traceable evidence, we say so and price the options rather than guess.

Fixed written quotes

After survey you get a fixed written quote for the agreed scope, so Inverness budgets are not open-ended.

Inverness building types

Fire-rated escape route glazing applies to many building types in Inverness, including retail and leisure units and industrial units.

Stair, Lobby & Corridor Glazing: Inverness questions

Can I use glass on a fire escape route?

Yes, if it is fire-rated to the required classification and, for integrity-only glass, within the limits building guidance sets for that position.

Do escape route doors need vision panels?

Doors that subdivide corridors or swing both ways normally do, and the glass must be fire-rated to suit the door.

Do you carry out fire-rated escape route glazing in Inverness?

Yes. We survey and install in Inverness and across Highlands and Islands, including the IV2 district and nearby Elgin.

Which rules apply to fire-rated glazing in Inverness?

Inverness is in Scotland, so work needs a building warrant and follows the Building Standards Technical Handbooks, with the Fire (Scotland) Act 2005 covering occupied premises.

Related

Related services in Inverness

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
E · EW · EI

Fire Glazing Surveys

Surveys that identify what fire glazing you have and what needs fixing.

Learn more →
Process

From enquiry to handover in Inverness

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Survey

We visit Inverness to measure, record existing marks and check the frames and substrate.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote