Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Wired glass replacement in Lichfield is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Schools, hospitals, housing blocks and older offices often still have wired glass in doors and corridors. We survey it, confirm what the frames can accept, and replace it with clear integrity or insulating glass that is compatible with the frame and carries an impact classification.
After survey you get a fixed written quote for the agreed scope, so Lichfield budgets are not open-ended.
If an existing frame in a Lichfield building has no traceable evidence, we say so and price the options rather than guess.
Every quote in Lichfield identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Doors, side panels and low-level glazing in busy corridors, sports halls and schools are usually replaced first.
Old frames may not have evidence for modern fire glass. We assess them and recommend frame replacement where the evidence cannot be established.
Wired glass breaks into sharp pieces held by wire, and the wire weakens the glass. In doors and low-level panels it is a common source of hand and arm injuries.
Coverage around Lichfield includes the WS13, WS14 districts and nearby Burntwood, Tamworth, Aldridge. Lichfield lies roughly 43 km from Stoke-on-Trent, within our Staffordshire coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Wired glass replacement applies to many building types in Lichfield, including retail and leisure units and blocks of flats.
It can provide integrity in the right frame, typically for 30 minutes and sometimes longer in tested systems, but it does not insulate, and plain wired glass usually lacks an impact safety classification.
When broken by impact it can cause serious cuts. That is why it is often replaced in doors and low-level positions.
Survey timing in Lichfield depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Replacement and new vision panels fitted to the door's evidence.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Lichfield and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.