Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Our wired glass replacement service covers Thornaby-on-Tees and neighbouring areas such as Stockton-on-Tees and Billingham, with every job built around a tested system.
Tell us what you need. We reply with next steps and a guide price.
Wired glass replacement means removing old Georgian or polished wired glass from doors, screens and panels and fitting modern fire-resistant glass that keeps the fire rating while meeting today's impact safety expectations. Wired glass holds together in a fire because of the mesh, but plain wired glass usually lacks an impact safety classification and can cause serious injuries when broken by impact.
Whether the building is in central Thornaby-on-Tees or the wider TS17, TS16, TS18, TS5, TS19, TS8 districts, we can survey and quote. We also cover Stockton-on-Tees, Billingham, Middlesbrough. Thornaby-on-Tees is about 66 km from York, the largest town in our North Yorkshire coverage.
Wired glass breaks into sharp pieces held by wire, and the wire weakens the glass. In doors and low-level panels it is a common source of hand and arm injuries.
We can replace wired glass over holidays, weekends or zone by zone to keep the building running.
Modern fire glass is clear, so replacements also improve visibility and appearance.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
You receive the classification references, glass marks and installation photographs for your fire safety records.
After survey you get a fixed written quote for the agreed scope, so Thornaby-on-Tees budgets are not open-ended.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Wired glass replacement applies to many building types in Thornaby-on-Tees, including retail and leisure units and blocks of flats.
It can provide integrity in the right frame, typically for 30 minutes and sometimes longer in tested systems, but it does not insulate, and plain wired glass usually lacks an impact safety classification.
Clear modern integrity or insulating fire glass with an impact classification, compatible with the frame.
Yes. We survey and install in Thornaby-on-Tees and across North Yorkshire, including the TS17 district and nearby Stockton-on-Tees.
Building work in Thornaby-on-Tees follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Replacement and new vision panels fitted to the door's evidence.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Thornaby-on-Tees to measure, record existing marks and check the frames and substrate.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.