Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Wired glass replacement in Totton is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Schools, hospitals, housing blocks and older offices often still have wired glass in doors and corridors. We survey it, confirm what the frames can accept, and replace it with clear integrity or insulating glass that is compatible with the frame and carries an impact classification.
We can replace wired glass over holidays, weekends or zone by zone to keep the building running.
Doors, side panels and low-level glazing in busy corridors, sports halls and schools are usually replaced first.
Wired glass breaks into sharp pieces held by wire, and the wire weakens the glass. In doors and low-level panels it is a common source of hand and arm injuries.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Coverage around Totton includes the SO40, SO16, SO15 districts and nearby Southampton, Hythe, Eastleigh. Totton lies roughly 6 km from Southampton, within our Hampshire coverage.
Every quote in Totton identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
If an existing frame in a Totton building has no traceable evidence, we say so and price the options rather than guess.
After survey you get a fixed written quote for the agreed scope, so Totton budgets are not open-ended.
Wired glass replacement applies to many building types in Totton, including care homes and offices.
Clear modern integrity or insulating fire glass with an impact classification, compatible with the frame.
There is no blanket ban, but glazing in critical locations must meet impact safety rules, and duty holders must manage the risk. Replacement is often the practical answer.
Building work in Totton follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We survey and install in Totton and across Hampshire, including the SO40 district and nearby Southampton.
Replacement and new vision panels fitted to the door's evidence.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Totton and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.