Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →If a building in Perth needs insulated fire glass, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
Insulated fire glass, classified EI, is glazing that maintains integrity and keeps the temperature rise on the non-fire side within set limits for the rated time. It is usually made of several glass panes bonded with interlayers that foam into an insulating barrier when heated, or with a clear gel that absorbs heat.
We cover Perth and the surrounding postcode districts, including PH1. Nearby towns we also serve include Glenrothes, Dundee, Kirkcaldy. Perth lies roughly 29 km from Dundee, within our Tayside coverage.
Insulating fire glass should be stored dry, upright and away from direct sun before fitting.
Modern EI glass is clear in normal use, with high light transmission at lower ratings.
EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Scottish guidance has its own approach to escape routes and compartmentation, so glazing designs are checked against the Technical Handbooks and the warrant drawings.
After survey you get a fixed written quote for the agreed scope, so Perth budgets are not open-ended.
Every quote in Perth identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Perth around residents, staff or pupils, with out-of-hours options.
We can survey and quote for offices, industrial units and other building types in Perth.
Yes. Once the interlayers have reacted, the glass has done its job and must be replaced.
Yes, in normal conditions. It turns opaque only when heated in a fire.
Yes. We survey and install in Perth and across Tayside, including the PH1 district and nearby Glenrothes.
Perth is in Scotland, so work needs a building warrant and follows the Building Standards Technical Handbooks, with the Fire (Scotland) Act 2005 covering occupied premises.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Butt-jointed fire glass walls with minimal frames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Perth to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.