Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Looking for insulated fire glass in St Austell? We survey, supply and install tested fire-rated glazing for offices, industrial units and other buildings in and around St Austell, including the PL25 postcode district.
Tell us what you need. We reply with next steps and a guide price.
EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.
When heated, the interlayers turn opaque and expand, forming an insulating shield. After a fire the glass will need replacing.
EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.
Some EI products are internal only. External use needs a product and edge seal approved for UV and weather.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Whether the building is in central St Austell or the wider PL25, PL26 districts, we can survey and quote. We also cover Truro, Newquay, Falmouth. St Austell is about 34 km from Truro, the largest town in our Cornwall coverage.
After survey you get a fixed written quote for the agreed scope, so St Austell budgets are not open-ended.
Every quote in St Austell identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in St Austell around residents, staff or pupils, with out-of-hours options.
We can survey and quote for offices, industrial units and other building types in St Austell.
It is a multi-layer product with specialist interlayers, and the frame and installation must suit its weight.
Only products approved for external use, usually in a sealed unit with UV protection.
Building work in St Austell follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Survey timing in St Austell depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Butt-jointed fire glass walls with minimal frames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in St Austell and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.