EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
West Yorkshire · LS1
Fire-Resistant Glass in Leeds, West Yorkshire
Fire-resistant glass in Leeds is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
E 30 – EI 120LS1England
Quote for Leeds
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass in Leeds: what's included
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Impact-classified build-ups for critical locations
Leeds coverage and nearby towns
Survey visits can be arranged anywhere in Leeds, including the LS1, LS2, LS3, LS9, LS4, LS6 districts, and in nearby Morley, Pudsey, Batley. Leeds is the largest town in our West Yorkshire coverage.
Fire glass in MorleyFire glass in PudseyFire glass in BatleyFire glass in YeadonFire glass in Dewsbury
Key checks for Leeds projects
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Which rules apply to fire-resistant glass in Leeds?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
What you can expect in Leeds
Honest about unknowns
If an existing frame in a Leeds building has no traceable evidence, we say so and price the options rather than guess.
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
England rules applied
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Leeds building types
We can survey and quote for hotels, healthcare buildings and other building types in Leeds.
Questions about fire-resistant glass in Leeds
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Can you price fire-resistant glass in Leeds from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Do you work on occupied buildings in Leeds?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Related
Related services in Leeds
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
What happens next
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Survey
We visit Leeds to measure, record existing marks and check the frames and substrate.
Written quote
You receive a written quote naming the tested system and classification.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.