EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
West Yorkshire · HX1
Halifax fire-resistant glass
When a fire strategy, inspection report or building control comment in Halifax calls for glazing tested to resist fire, our fire-resistant glass service covers survey, supply and installation.
E 30 – EI 120HX1England
Quote for Halifax
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-resistant glass in Halifax
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Glazing beads and fixings to the frame manufacturer's details
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
What every Halifax quote includes
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Halifax budgets are not open-ended.
England rules applied
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Rated systems, not just rated glass
Every quote in Halifax identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
What to check before ordering fire-resistant glass in Halifax
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Areas we cover around Halifax
Whether the building is in central Halifax or the wider HX1, HX3, HX5, HD6 districts, we can survey and quote. We also cover Brighouse, Huddersfield, Cleckheaton. Leeds, around 22 km from Halifax, is the largest town in the same coverage area.
Fire glass in BrighouseFire glass in HuddersfieldFire glass in CleckheatonFire glass in BradfordFire glass in Shipley
Which rules apply to fire-resistant glass in Halifax?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Sectors we cover in Halifax
Sector guides below cover offices, public buildings and other buildings in Halifax.
Fire-Resistant Glass: Halifax questions
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Which rules apply to fire-rated glazing in Halifax?
Building work in Halifax follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Can you price fire-resistant glass in Halifax from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Related
Related services in Halifax
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
How a Halifax job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Halifax and check what the existing frames can accept.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.