Scotland · 30 postcode districts
Fire-Resistant Glass across Tayside
We survey, supply and install fire-resistant glass across Tayside, from Dundee to Perth, Arbroath, working to the classification your fire strategy sets.
E 30 – EI 120ScotlandPHDDFK
Quote for Tayside
Tell us what you need. We reply with next steps and a guide price.
What our fire-resistant glass service includes in Tayside
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Integrity with radiation control (EW) laminated glass
- Glazing beads and fixings to the frame manufacturer's details
- Impact-classified build-ups for critical locations
Fire-Resistant Glass by town in Tayside
Our Tayside coverage spans 30 postcode districts across the PH, DD, FK, KY postcode areas.
Key checks for Tayside projects
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Inside or outside?
Many insulating fire glasses use interlayers that need protecting from UV and moisture, so external positions need a product approved for exterior use, with the right edge seal and glazing system.
Scotland rules for fire glazing
Scotland Which rules apply?
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Scottish guidance has its own approach to escape routes and compartmentation, so glazing designs are checked against the Technical Handbooks and the warrant drawings.
FAQs for Tayside
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Can you survey anywhere in Tayside?
Yes. We can arrange surveys anywhere in Tayside, including Dundee and Perth, Arbroath.
Related
Related services in Tayside
Process
What happens next
Share the details
Send the fire strategy extract, inspection report or a few photos of the openings.
Site visit
A survey in Tayside confirms sizes, access, existing evidence and fixing conditions.
Written quote
You receive a written quote naming the tested system and classification.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.