Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Surrey · GU9

Fire-Resistant Glass for Farnham buildings

When a fire strategy, inspection report or building control comment in Farnham calls for glazing tested to resist fire, our fire-resistant glass service covers survey, supply and installation.

E 30 – EI 120GU9England

Quote for Farnham

Tell us what you need. We reply with next steps and a guide price.

What our fire-resistant glass service includes in Farnham

We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.

  • Impact-classified build-ups for critical locations
  • Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
  • Intumescent glazing seals, tapes and gaskets to the tested specification
  • Glazing beads and fixings to the frame manufacturer's details

Before you order fire-resistant glass: what matters

Which classification do you actually need?

The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.

Impact safety still applies

Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.

Can any fire glass go in any fire-rated frame?

No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.

Areas we cover around Farnham

Whether the building is in central Farnham or the wider GU9, GU10, GU11 districts, we can survey and quote. We also cover Aldershot, Fleet, Farnborough. Woking, around 20 km from Farnham, is the largest town in the same coverage area.

What you can expect in Farnham

Fixed written quotes

After survey you get a fixed written quote for the agreed scope, so Farnham budgets are not open-ended.

England rules applied

Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.

Rated systems, not just rated glass

Every quote in Farnham identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

Sectors we cover in Farnham

Fire-resistant glass applies to many building types in Farnham, including industrial units and public buildings.

Fire-Resistant Glass: Farnham questions

What is the difference between E, EW and EI fire glass?

E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.

How thick is fire-resistant glass?

Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.

Can you price fire-resistant glass in Farnham from photos?

We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.

Which rules apply to fire-rated glazing in Farnham?

Building work in Farnham follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Farnham

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

What happens next

Share the details

Send the fire strategy extract, inspection report or a few photos of the openings.

Survey

We visit Farnham to measure, record existing marks and check the frames and substrate.

Quote and evidence

Your quote lists each item with its classification and the evidence it relies on.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote