Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Wales · 13 postcode districts

Fire-Resistant Glass for Powys buildings

We take fire-resistant glass enquiries from across Powys, with surveys arranged in Newtown, Brecon, Welshpool, Llandrindod Wells, Ystradgynlais and the surrounding towns.

E 30 – EI 120WalesLDSYSA

Quote for Powys

Tell us what you need. We reply with next steps and a guide price.

Gloved hands setting a thick laminated glass pane onto setting blocks in a grey steel glazing frame

Fire-Resistant Glass: an overview for Powys

We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.

  • Integrity with radiation control (EW) laminated glass
  • Impact-classified build-ups for critical locations
  • Insulating (EI) intumescent-interlayer and gel-filled glass

What to check before ordering in Powys

Impact safety still applies

Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.

Can any fire glass go in any fire-rated frame?

No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.

Which classification do you actually need?

The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.

Which rules apply in Wales?

Wales Which rules apply?

Building regulations are devolved in Wales, so fire safety design follows the Welsh Ministers' version of Approved Document B rather than the English one, alongside impact safety guidance for glazing.

The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, so the responsible person must maintain fire-resisting glazing as part of the premises' fire safety measures. The Fire Safety Act 2021 confirmed this extends to the structure, external walls and flat entrance doors of multi-occupied residential buildings.

Wales is introducing its own building safety regime for occupied residential buildings, so check current Welsh requirements before planning major works to blocks of flats.

Places we cover in Powys

Powys coverage includes Newtown, Brecon, Welshpool, Llandrindod Wells, Ystradgynlais and the LD, SY, SA, NP postcode areas (13 postcode districts).

Questions from Powys clients

Do you supply fire glass only?

Our service is supply and installation, because the rating depends on how the glass is fitted. For trade buyers we can quote supply of cut-to-size panes with the matching glazing materials on request.

How thick is fire-resistant glass?

Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.

What is the difference between E, EW and EI fire glass?

E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.

Which parts of Powys do you cover?

All of it: Newtown, Brecon, Welshpool, Llandrindod Wells, Ystradgynlais and every district in the LD, SY, SA, NP postcode areas.

Related

Related services in Powys

Process

From enquiry to handover in Powys

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Survey

We visit Powys to measure, record existing marks and check the frames and substrate.

Quote and evidence

Your quote lists each item with its classification and the evidence it relies on.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote