EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Merseyside · L32
Kirkby fire-resistant glass
We provide fire-resistant glass in Kirkby and across Merseyside, working from the classification your building needs and handing over the evidence that proves what was fitted.
E 30 – EI 120L32England
Quote for Kirkby
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass in Kirkby: what's included
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Glazing beads and fixings to the frame manufacturer's details
- Impact-classified build-ups for critical locations
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Intumescent glazing seals, tapes and gaskets to the tested specification
Before you order fire-resistant glass: what matters
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Where we work around Kirkby
Survey visits can be arranged anywhere in Kirkby, including the L32, L33, L11, L10, L9, L68 districts, and in nearby Maghull, Litherland, Prescot. Liverpool, around 10 km from Kirkby, is the largest town in the same coverage area.
Fire glass in MaghullFire glass in LitherlandFire glass in PrescotFire glass in BootleFire glass in Huyton
How we work in Kirkby
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Honest about unknowns
If an existing frame in a Kirkby building has no traceable evidence, we say so and price the options rather than guess.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Kirkby budgets are not open-ended.
Building types we cover in Kirkby
We can survey and quote for hotels, offices and other building types in Kirkby.
Fire-Resistant Glass: Kirkby questions
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Which rules apply to fire-rated glazing in Kirkby?
Building work in Kirkby follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Do you work on occupied buildings in Kirkby?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Related
Related services in Kirkby
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
What happens next
Share the details
Send the fire strategy extract, inspection report or a few photos of the openings.
Survey
We visit Kirkby to measure, record existing marks and check the frames and substrate.
Written quote
You receive a written quote naming the tested system and classification.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.