EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Leicestershire · LE13
Fire-Resistant Glass — Melton Mowbray and LE13
For Melton Mowbray buildings, we supply, replace and check fire-resistant glass wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
E 30 – EI 120LE13England
Quote for Melton Mowbray
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-resistant glass in Melton Mowbray
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Glazing beads and fixings to the frame manufacturer's details
- Integrity with radiation control (EW) laminated glass
Where we work around Melton Mowbray
Survey visits can be arranged anywhere in Melton Mowbray, including the LE13, LE14 districts, and in nearby Loughborough, Leicester, Oadby. Leicester, around 22 km from Melton Mowbray, is the largest town in the same coverage area.
Fire glass in LoughboroughFire glass in LeicesterFire glass in OadbyFire glass in GranthamFire glass in West Bridgford
Key checks for Melton Mowbray projects
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
What every Melton Mowbray quote includes
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Melton Mowbray budgets are not open-ended.
Work around occupied buildings
We can phase work in Melton Mowbray around residents, staff or pupils, with out-of-hours options.
Honest about unknowns
If an existing frame in a Melton Mowbray building has no traceable evidence, we say so and price the options rather than guess.
Sectors we cover in Melton Mowbray
Sector guides below cover hotels, blocks of flats and other buildings in Melton Mowbray.
FAQs for Melton Mowbray
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
How quickly can you survey in Melton Mowbray?
Survey timing in Melton Mowbray depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Which rules apply to fire-rated glazing in Melton Mowbray?
Building work in Melton Mowbray follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Related
Related services in Melton Mowbray
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
From enquiry to handover in Melton Mowbray
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Melton Mowbray and check what the existing frames can accept.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.