EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Greater London · N18
Fire-Resistant Glass for Edmonton buildings
From the N18 district outwards, we arrange fire-resistant glass for buildings across Edmonton, matching glass, frames and seals to tested evidence rather than guesswork.
E 30 – EI 120N18England
Quote for Edmonton
Tell us what you need. We reply with next steps and a guide price.
What our fire-resistant glass service includes in Edmonton
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Glazing beads and fixings to the frame manufacturer's details
- Impact-classified build-ups for critical locations
- Insulating (EI) intumescent-interlayer and gel-filled glass
Key checks for Edmonton projects
Inside or outside?
Many insulating fire glasses use interlayers that need protecting from UV and moisture, so external positions need a product approved for exterior use, with the right edge seal and glazing system.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Where we work around Edmonton
Survey visits can be arranged anywhere in Edmonton, including the N18, N9, EN3, N21, N17, EN1 districts, and in nearby Tottenham, Enfield, Chingford. Edmonton is one of the Greater London districts we cover.
Fire glass in TottenhamFire glass in EnfieldFire glass in ChingfordFire glass in WalthamstowFire glass in Wood Green
What every Edmonton quote includes
Rated systems, not just rated glass
Every quote in Edmonton identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Edmonton budgets are not open-ended.
Building types we cover in Edmonton
Fire-resistant glass applies to many building types in Edmonton, including public buildings and hotels.
Questions about fire-resistant glass in Edmonton
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Can you price fire-resistant glass in Edmonton from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Do you work on occupied buildings in Edmonton?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Related
Related services in Edmonton
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
From enquiry to handover in Edmonton
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Survey
We visit Edmonton to measure, record existing marks and check the frames and substrate.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.