EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Gloucestershire · BS15
Fire-Resistant Glass for Kingswood buildings
Fire-resistant glass in Kingswood is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
E 30 – EI 120BS15England
Quote for Kingswood
Tell us what you need. We reply with next steps and a guide price.
What our fire-resistant glass service includes in Kingswood
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Glazing beads and fixings to the frame manufacturer's details
- Impact-classified build-ups for critical locations
- Intumescent glazing seals, tapes and gaskets to the tested specification
What every Kingswood quote includes
Work around occupied buildings
We can phase work in Kingswood around residents, staff or pupils, with out-of-hours options.
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Kingswood budgets are not open-ended.
What to check before ordering fire-resistant glass in Kingswood
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Inside or outside?
Many insulating fire glasses use interlayers that need protecting from UV and moisture, so external positions need a product approved for exterior use, with the right edge seal and glazing system.
Where we work around Kingswood
Whether the building is in central Kingswood or the wider BS15, BS5, BS30, BS4, BS0, BS16 districts, we can survey and quote. We also cover Mangotsfield, Bristol, Yate. Gloucester, around 49 km from Kingswood, is the largest town in the same coverage area.
Fire glass in MangotsfieldFire glass in BristolFire glass in YateFire glass in BathFire glass in Nailsea
England regulations that shape the job
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Building types we cover in Kingswood
Sector guides below cover care homes, blocks of flats and other buildings in Kingswood.
Questions about fire-resistant glass in Kingswood
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Is toughened glass fire-resistant?
Ordinary toughened safety glass is not. It can shatter early in a fire. Fire-resistant integrity glass is specially processed or formulated and only gains a rating when fitted in a tested frame and glazing system.
Can you price fire-resistant glass in Kingswood from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Which rules apply to fire-rated glazing in Kingswood?
Building work in Kingswood follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Related
Related services in Kingswood
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
What happens next
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Survey
We visit Kingswood to measure, record existing marks and check the frames and substrate.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.