Fire-Resistant Glass in Fife
We take fire-resistant glass enquiries from across Fife, with surveys arranged in Dunfermline, Kirkcaldy, Glenrothes and the surrounding towns.
Quote for Fife
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass: what you get in Fife
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Integrity with radiation control (EW) laminated glass
- Glazing beads and fixings to the frame manufacturer's details
- Impact-classified build-ups for critical locations
Towns we cover in Fife
We cover fire-resistant glass in Dunfermline and across Fife, including Kirkcaldy, Glenrothes.
What to check before ordering in Fife
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Scotland rules for fire glazing
Scotland Which rules apply?
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Fire-Resistant Glass in Fife: questions
Do you supply fire glass only?
Our service is supply and installation, because the rating depends on how the glass is fitted. For trade buyers we can quote supply of cut-to-size panes with the matching glazing materials on request.
Is toughened glass fire-resistant?
Ordinary toughened safety glass is not. It can shatter early in a fire. Fire-resistant integrity glass is specially processed or formulated and only gains a rating when fitted in a tested frame and glazing system.
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Do you cover all of Fife?
Yes. We take enquiries from across Fife, including Dunfermline and Kirkcaldy, Glenrothes, and arrange surveys to suit your programme.
Related services in Fife
How a Fife job runs
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Measure and check
We measure each opening in Fife and check what the existing frames can accept.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.