EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
East Riding of Yorkshire · HU17
Beverley fire-resistant glass
Looking for fire-resistant glass in Beverley? We survey, supply and install tested fire-rated glazing for industrial units, blocks of flats and other buildings in and around Beverley, including the HU17 postcode district.
E 30 – EI 120HU17England
Quote for Beverley
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass in Beverley: what's included
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Impact-classified build-ups for critical locations
What to check before ordering fire-resistant glass in Beverley
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Beverley coverage and nearby towns
Survey visits can be arranged anywhere in Beverley, including the HU17 districts, and in nearby Kingston upon Hull, Bridlington, Scunthorpe. Beverley lies roughly 13 km from Kingston upon Hull, within our East Riding of Yorkshire coverage.
Fire glass in Kingston upon HullFire glass in BridlingtonFire glass in ScunthorpeFire glass in GooleFire glass in Grimsby
How we work in Beverley
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Work around occupied buildings
We can phase work in Beverley around residents, staff or pupils, with out-of-hours options.
England rules applied
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Sectors we cover in Beverley
Sector guides below cover industrial units, blocks of flats and other buildings in Beverley.
Questions about fire-resistant glass in Beverley
Do you supply fire glass only?
Our service is supply and installation, because the rating depends on how the glass is fitted. For trade buyers we can quote supply of cut-to-size panes with the matching glazing materials on request.
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
Do you carry out fire-resistant glass in Beverley?
Yes. We survey and install in Beverley and across East Riding of Yorkshire, including the HU17 district and nearby Kingston upon Hull.
How quickly can you survey in Beverley?
Survey timing in Beverley depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Related
Related services in Beverley
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
What happens next
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Survey
We visit Beverley to measure, record existing marks and check the frames and substrate.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Complete and document
Work is completed to the manufacturer's details and documented for your records.