Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Somerset · BS48

Nailsea timber fire-rated screens

Timber fire-rated screens in Nailsea is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.

E 30 – EI 60BS48England

Quote for Nailsea

Tell us what you need. We reply with next steps and a guide price.

What our timber fire-rated screens service includes in Nailsea

Timber fire-rated screens are glazed partitions made with hardwood frames, glazing beads and intumescent seals that have been tested together to resist fire. They are common in schools, healthcare, heritage buildings and residential blocks where a warmer finish is wanted.

  • Fire glass with the specified intumescent glazing system
  • Over-panels, side panels and borrowed lights
  • Fire-stopping to the structure
  • Fire-rated timber doorsets set into screens

What to check before ordering timber fire-rated screens in Nailsea

Species and density count

Timber screens are tested with specific species and minimum densities. Softwood substitutions or thinner sections can fall outside the evidence.

Insulating glass weight

Heavier insulating glass may need larger sections; we confirm the frame can carry the chosen build-up.

Moisture and movement

Timber frames need dry conditions on site and acclimatisation before glazing to avoid movement around the glass.

Where we work around Nailsea

We cover Nailsea and the surrounding postcode districts, including BS48, BS20. Nearby towns we also serve include Portishead, Clevedon, Bristol. Nailsea lies roughly 28 km from Bath, within our Somerset coverage.

How we work in Nailsea

Rated systems, not just rated glass

Every quote in Nailsea identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Work around occupied buildings

We can phase work in Nailsea around residents, staff or pupils, with out-of-hours options.

Fixed written quotes

After survey you get a fixed written quote for the agreed scope, so Nailsea budgets are not open-ended.

Which rules apply to timber fire-rated screens in Nailsea?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Sectors we cover in Nailsea

Sector guides below cover hotels, public buildings and other buildings in Nailsea.

FAQs for Nailsea

Can you upgrade an old timber screen?

Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.

Can timber screens be painted?

Yes. The timber can be painted, stained or lacquered. Intumescent seals are kept clear of paint.

Do you work on occupied buildings in Nailsea?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

Which rules apply to fire-rated glazing in Nailsea?

Building work in Nailsea follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Nailsea

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
to door rating

Fire Door Vision Panels

Replacement and new vision panels fitted to the door's evidence.

Learn more →
Process

From enquiry to handover in Nailsea

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Site visit

A survey in Nailsea confirms sizes, access, existing evidence and fixing conditions.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote