Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Greater Manchester · SK14

Timber Fire-Rated Screens in Hyde

Our timber fire-rated screens service covers Hyde and neighbouring areas such as Denton and Dukinfield, with every job built around a tested system.

E 30 – EI 60SK14England

Quote for Hyde

Tell us what you need. We reply with next steps and a guide price.

What's involved with timber fire-rated screens in Hyde

Timber fire-rated screens are glazed partitions made with hardwood frames, glazing beads and intumescent seals that have been tested together to resist fire. They are common in schools, healthcare, heritage buildings and residential blocks where a warmer finish is wanted.

  • Fire-stopping to the structure
  • Over-panels, side panels and borrowed lights
  • Fire glass with the specified intumescent glazing system
  • Fire-rated timber doorsets set into screens

Before you order timber fire-rated screens: what matters

Beads are part of the rating

Bead profile, height and fixing type and spacing are all taken from the test. Short-cutting the fixings is a common reason screens fail inspection.

Finishing

Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.

Heritage buildings

Timber suits listed and older buildings, and existing screens can sometimes be upgraded with new glass and seals, subject to an assessment of the frame.

England regulations that shape the job

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Areas we cover around Hyde

Coverage around Hyde includes the SK14, M34, SK16, SK15, OL7, OL6 districts and nearby Denton, Dukinfield, Stalybridge. Manchester, around 11 km from Hyde, is the largest town in the same coverage area.

What every Hyde quote includes

Fixed written quotes

After survey you get a fixed written quote for the agreed scope, so Hyde budgets are not open-ended.

Rated systems, not just rated glass

Every quote in Hyde identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Work around occupied buildings

We can phase work in Hyde around residents, staff or pupils, with out-of-hours options.

Building types we cover in Hyde

We can survey and quote for industrial units, public buildings and other building types in Hyde.

FAQs for Hyde

Can you upgrade an old timber screen?

Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.

Can timber screens be painted?

Yes. The timber can be painted, stained or lacquered. Intumescent seals are kept clear of paint.

How quickly can you survey in Hyde?

Survey timing in Hyde depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.

Which rules apply to fire-rated glazing in Hyde?

Building work in Hyde follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Hyde

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
to door rating

Fire Door Vision Panels

Replacement and new vision panels fitted to the door's evidence.

Learn more →
Process

From enquiry to handover in Hyde

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Site visit

A survey in Hyde confirms sizes, access, existing evidence and fixing conditions.

Written quote

You receive a written quote naming the tested system and classification.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote