Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Steel fire-rated screens in Rugby is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Steel fire-rated screens use steel frame sections to hold fire-resistant glass, and they are the usual choice when a project needs slim sightlines with a high rating, large panes or heavy insulating glass. Steel keeps its strength well in fire and can carry the weight of thick EI glass over long spans.
Survey visits can be arranged anywhere in Rugby, including the CV21, CV22, CV23 districts, and in nearby Daventry, Coventry, Bedworth. Nuneaton, around 22 km from Rugby, is the largest town in the same coverage area.
Paint and powder coat are normally covered by the evidence, but intumescent strips and seals must not be painted over. We protect them during finishing.
Steel screens with insulating glass are heavy. Fixings are taken from the system details and the substrate is checked to carry the load.
Steel systems are fabricated to measure, so allow for survey, drawings, approval and fabrication before the fit date.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Every quote in Rugby identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
If an existing frame in a Rugby building has no traceable evidence, we say so and price the options rather than guess.
We can survey and quote for offices, retail and leisure units and other building types in Rugby.
Yes. Single, double and in some systems sliding doors can be built into the screen, provided the combination is covered by the evidence.
Often slightly, especially at higher ratings, but steel can be the more economical route when panes are large or the rating is EI 60 and above.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Building work in Rugby follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
A survey in Rugby confirms sizes, access, existing evidence and fixing conditions.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.