Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →For Telford buildings, we supply, replace and check steel fire-rated screens wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
Steel fire-rated screens use steel frame sections to hold fire-resistant glass, and they are the usual choice when a project needs slim sightlines with a high rating, large panes or heavy insulating glass. Steel keeps its strength well in fire and can carry the weight of thick EI glass over long spans.
Paint and powder coat are normally covered by the evidence, but intumescent strips and seals must not be painted over. We protect them during finishing.
Decorative steel-look aluminium or slim steel partitions sold for offices are not automatically fire-rated. We only fit systems with test or assessment evidence for the classification you need.
Steel systems are fabricated to measure, so allow for survey, drawings, approval and fabrication before the fit date.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Survey visits can be arranged anywhere in Telford, including the TF3, TF4, TF2, TF1, TF7 districts, and in nearby Wellington, Shrewsbury, Wolverhampton. Telford is the main town we cover in Shropshire.
Every quote in Telford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Telford around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Telford budgets are not open-ended.
We can survey and quote for hotels, student accommodation and other building types in Telford.
Most steel fire screens can be powder-coated to a wide range of RAL colours, with black and anthracite the most requested.
Often slightly, especially at higher ratings, but steel can be the more economical route when panes are large or the rating is EI 60 and above.
Building work in Telford follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We survey and install in Telford and across Shropshire, including the TF3 district and nearby Wellington.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Telford and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.