Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Steel fire-rated screens in Basingstoke is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Steel fire-rated screens use steel frame sections to hold fire-resistant glass, and they are the usual choice when a project needs slim sightlines with a high rating, large panes or heavy insulating glass. Steel keeps its strength well in fire and can carry the weight of thick EI glass over long spans.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Every quote in Basingstoke identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Steel screens with insulating glass are heavy. Fixings are taken from the system details and the substrate is checked to carry the load.
Where steel glazing forms an external wall, thermal performance and condensation need designing in as well as the fire rating.
Steel systems are fabricated to measure, so allow for survey, drawings, approval and fabrication before the fit date.
Survey visits can be arranged anywhere in Basingstoke, including the RG21, RG24, RG22 districts, and in nearby Fleet, Thatcham, Yateley. Basingstoke is about 46 km from Southampton, the largest town in our Hampshire coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Steel fire-rated screens applies to many building types in Basingstoke, including industrial units and blocks of flats.
Some steel systems with that look are tested for fire, many decorative ones are not. Ask for the classification and test evidence; we only quote tested systems for fire-rated positions.
Yes. Single, double and in some systems sliding doors can be built into the screen, provided the combination is covered by the evidence.
Yes. We survey and install in Basingstoke and across Hampshire, including the RG21 district and nearby Fleet.
Building work in Basingstoke follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Basingstoke and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.