Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Our steel fire-rated screens service covers Basildon and neighbouring areas such as Pitsea and Stanford-le-Hope, with every job built around a tested system.
Tell us what you need. We reply with next steps and a guide price.
Steel fire-rated screens use steel frame sections to hold fire-resistant glass, and they are the usual choice when a project needs slim sightlines with a high rating, large panes or heavy insulating glass. Steel keeps its strength well in fire and can carry the weight of thick EI glass over long spans.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
If an existing frame in a Basildon building has no traceable evidence, we say so and price the options rather than guess.
After survey you get a fixed written quote for the agreed scope, so Basildon budgets are not open-ended.
Steel profiles stay slim at higher ratings and carry heavy glass without bulky frames, which suits stair cores, lobbies and offices where light matters.
Steel systems are fabricated to measure, so allow for survey, drawings, approval and fabrication before the fit date.
Paint and powder coat are normally covered by the evidence, but intumescent strips and seals must not be painted over. We protect them during finishing.
Survey visits can be arranged anywhere in Basildon, including the SS14, SS16, SS15, SS13 districts, and in nearby Pitsea, Stanford-le-Hope, Wickford. Southend-on-Sea, around 18 km from Basildon, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We can survey and quote for schools and colleges, industrial units and other building types in Basildon.
Some steel systems with that look are tested for fire, many decorative ones are not. Ask for the classification and test evidence; we only quote tested systems for fire-rated positions.
Often slightly, especially at higher ratings, but steel can be the more economical route when panes are large or the rating is EI 60 and above.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Building work in Basildon follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Basildon and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.