Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Steel fire-rated screens in Macclesfield is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Steel fire-rated screens use steel frame sections to hold fire-resistant glass, and they are the usual choice when a project needs slim sightlines with a high rating, large panes or heavy insulating glass. Steel keeps its strength well in fire and can carry the weight of thick EI glass over long spans.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
We can phase work in Macclesfield around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Macclesfield budgets are not open-ended.
Where steel glazing forms an external wall, thermal performance and condensation need designing in as well as the fire rating.
Steel systems are fabricated to measure, so allow for survey, drawings, approval and fabrication before the fit date.
Steel screens with insulating glass are heavy. Fixings are taken from the system details and the substrate is checked to carry the load.
Our Cheshire coverage takes in Macclesfield (SK11, SK10) and the neighbouring towns of Wilmslow, Congleton, Cheadle Hulme. Warrington, around 34 km from Macclesfield, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Steel fire-rated screens applies to many building types in Macclesfield, including offices and hotels.
Yes. Single, double and in some systems sliding doors can be built into the screen, provided the combination is covered by the evidence.
Often slightly, especially at higher ratings, but steel can be the more economical route when panes are large or the rating is EI 60 and above.
Survey timing in Macclesfield depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Yes. We survey and install in Macclesfield and across Cheshire, including the SK11 district and nearby Wilmslow.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We visit Macclesfield to measure, record existing marks and check the frames and substrate.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.