Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →If a building in Shrewsbury needs fire-rated glazed doors, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
We supply and install glazed fire doorsets in timber, steel and aluminium, single and double, as stand-alone doors or within glazed screens. We match the door to the rating and duty of its position, and fit it to the manufacturer's installation instructions.
After survey you get a fixed written quote for the agreed scope, so Shrewsbury budgets are not open-ended.
Every quote in Shrewsbury identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
If an existing frame in a Shrewsbury building has no traceable evidence, we say so and price the options rather than guess.
Self-closing devices and correct gaps are part of the performance. We set them at installation and record them.
Each door design allows a maximum glazed area and aperture positions. Bigger glass needs a door tested for it.
Doors that subdivide corridors and doors that swing both ways normally need vision panels, and integrity-only glass in doors may be limited by building guidance on escape routes.
We cover Shrewsbury and the surrounding postcode districts, including SY1, SY2, SY3. Nearby towns we also serve include Wellington, Telford, Rhosllannerchrugog. Telford, around 21 km from Shrewsbury, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Fire-rated glazed doors applies to many building types in Shrewsbury, including care homes and schools and colleges.
Yes. They need fire-resistant glass of the type and thickness tested, fitted with the specified beads and seals.
FD30 is a UK shorthand for a door providing 30 minutes' fire resistance. Under European classification the same door would be described with an E or EI rating, with S added where smoke control is tested.
Building work in Shrewsbury follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Replacement and new vision panels fitted to the door's evidence.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
A survey in Shrewsbury confirms sizes, access, existing evidence and fixing conditions.
You receive a written quote naming the tested system and classification.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.