Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Our fire-rated glazed doors service covers Wishaw and neighbouring areas such as Motherwell and Hamilton, with every job built around a tested system.
Tell us what you need. We reply with next steps and a guide price.
A fire-rated glazed door is a fire door with substantial glass in it, from a large vision panel to a fully glazed leaf, supplied as a tested doorset or to a certificated specification. The glass, beads, seals, frame, hinges, closer and lock all form part of the rating.
Opening forces, vision panel zones and contrast need to work with accessibility guidance as well as fire.
The safest route is a complete doorset with frame and hardware tested together. Mixing a leaf from one source with a frame from another needs evidence that covers the combination.
Each door design allows a maximum glazed area and aperture positions. Bigger glass needs a door tested for it.
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Whether the building is in central Wishaw or the wider ML2, ML1 districts, we can survey and quote. We also cover Motherwell, Hamilton, Airdrie. Wishaw lies roughly 16 km from East Kilbride, within our Lanarkshire coverage.
Designs follow the building and fire safety rules that apply in Scotland, not a one-size-fits-all approach.
After survey you get a fixed written quote for the agreed scope, so Wishaw budgets are not open-ended.
Every quote in Wishaw identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Sector guides below cover public buildings, blocks of flats and other buildings in Wishaw.
Yes. They need fire-resistant glass of the type and thickness tested, fitted with the specified beads and seals.
Cutting new apertures into a fire door is only acceptable when done under the door manufacturer's or certification scheme's instructions. Often a new doorset is the safer answer.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Survey timing in Wishaw depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Replacement and new vision panels fitted to the door's evidence.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Wishaw to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.