Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →For Cirencester buildings, we supply, replace and check fire-rated glazed doors wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
We supply and install glazed fire doorsets in timber, steel and aluminium, single and double, as stand-alone doors or within glazed screens. We match the door to the rating and duty of its position, and fit it to the manufacturer's installation instructions.
You receive the classification references, glass marks and installation photographs for your fire safety records.
After survey you get a fixed written quote for the agreed scope, so Cirencester budgets are not open-ended.
If an existing frame in a Cirencester building has no traceable evidence, we say so and price the options rather than guess.
Each door design allows a maximum glazed area and aperture positions. Bigger glass needs a door tested for it.
Self-closing devices and correct gaps are part of the performance. We set them at installation and record them.
The safest route is a complete doorset with frame and hardware tested together. Mixing a leaf from one source with a frame from another needs evidence that covers the combination.
Survey visits can be arranged anywhere in Cirencester, including the GL7 districts, and in nearby Stroud, Cheltenham, Swindon. Gloucester, around 25 km from Cirencester, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
We can survey and quote for schools and colleges, blocks of flats and other building types in Cirencester.
Yes, some steel, aluminium and timber doorsets are tested with large or full-height glazing. The glass must be the type and size in the evidence.
Yes. They need fire-resistant glass of the type and thickness tested, fitted with the specified beads and seals.
Yes. We survey and install in Cirencester and across Gloucestershire, including the GL7 district and nearby Stroud.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Replacement and new vision panels fitted to the door's evidence.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Cirencester and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.