Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Cheshire · CW1

Fire-Rated Glazed Doors across Crewe

When a fire strategy, inspection report or building control comment in Crewe calls for glazing tested to resist fire, our fire-rated glazed doors service covers survey, supply and installation.

FD30 / FD60CW1England

Quote for Crewe

Tell us what you need. We reply with next steps and a guide price.

Fire-Rated Glazed Doors in Crewe: what's included

A fire-rated glazed door is a fire door with substantial glass in it, from a large vision panel to a fully glazed leaf, supplied as a tested doorset or to a certificated specification. The glass, beads, seals, frame, hinges, closer and lock all form part of the rating.

  • Ironmongery compatible with the door evidence
  • Matching side panels and fanlights
  • Hold-open devices linked to the alarm where specified
  • Fully glazed steel and aluminium doors within screens

How we work in Crewe

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Rated systems, not just rated glass

Every quote in Crewe identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Work around occupied buildings

We can phase work in Crewe around residents, staff or pupils, with out-of-hours options.

Before you order fire-rated glazed doors: what matters

Closers and gaps

Self-closing devices and correct gaps are part of the performance. We set them at installation and record them.

Ongoing checks

Residential blocks in England over 11 metres need regular fire door checks under the Fire Safety (England) Regulations 2022; glazed doors are included.

Glazed area limits

Each door design allows a maximum glazed area and aperture positions. Bigger glass needs a door tested for it.

Crewe coverage and nearby towns

Our Cheshire coverage takes in Crewe (CW1, CW2, CW5) and the neighbouring towns of Winsford, Kidsgrove, Congleton. Warrington, around 34 km from Crewe, is the largest town in the same coverage area.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Sectors we cover in Crewe

Fire-rated glazed doors applies to many building types in Crewe, including retail and leisure units and offices.

FAQs for Crewe

What does FD30 mean on a glazed door?

FD30 is a UK shorthand for a door providing 30 minutes' fire resistance. Under European classification the same door would be described with an E or EI rating, with S added where smoke control is tested.

Can a fire door be fully glazed?

Yes, some steel, aluminium and timber doorsets are tested with large or full-height glazing. The glass must be the type and size in the evidence.

Do you carry out fire-rated glazed doors in Crewe?

Yes. We survey and install in Crewe and across Cheshire, including the CW1 district and nearby Winsford.

Can you price fire-rated glazed doors in Crewe from photos?

We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.

Related

Related services in Crewe

to door rating

Fire Door Vision Panels

Replacement and new vision panels fitted to the door's evidence.

Learn more →
Process

From enquiry to handover in Crewe

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Measure and check

We measure each opening in Crewe and check what the existing frames can accept.

Written quote

You receive a written quote naming the tested system and classification.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote