Frameless Fire-Rated Glazing
Butt-jointed fire glass walls with minimal frames.
Learn more →We provide fire-rated glass partitions in Walsall and across West Midlands, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
Fire-rated glass partitions are office-style glazed walls that are also tested to resist fire, used where a meeting room, corridor wall or reception wall forms part of a protected route or compartment. They look like standard office partitions but use rated frames, glass and seals throughout.
Whether the building is in central Walsall or the wider WS1, WS2, WS5, WS4, WV13, WS10 districts, we can survey and quote. We also cover Bloxwich, Wednesbury, Aldridge. Walsall is about 13 km from Birmingham, the largest town in our West Midlands coverage.
Non-rated partitions on the same floor can be matched in profile and finish.
Rated partitions need fire-stopping inspected before ceilings close. We plan inspection points into the fit-out programme.
A fire-rated partition is only as good as the construction above it. If the wall has to run to the slab, the ceiling void needs fire-stopping or a rated head detail.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
After survey you get a fixed written quote for the agreed scope, so Walsall budgets are not open-ended.
We can phase work in Walsall around residents, staff or pupils, with out-of-hours options.
Every quote in Walsall identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can survey and quote for public buildings, retail and leisure units and other building types in Walsall.
Only where the fire strategy says the wall is fire-resisting, for example along a protected escape corridor or a compartment line. Many meeting room walls do not need a rating.
Yes. We can supply and install the rated glazing package within a wider fit-out, working to your programme.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Building work in Walsall follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Butt-jointed fire glass walls with minimal frames.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Walsall and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.