Frameless Fire-Rated Glazing
Butt-jointed fire glass walls with minimal frames.
Learn more →If a building in Atherton needs fire-rated glass partitions, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
Fire-rated glass partitions are office-style glazed walls that are also tested to resist fire, used where a meeting room, corridor wall or reception wall forms part of a protected route or compartment. They look like standard office partitions but use rated frames, glass and seals throughout.
Meeting rooms often need acoustic performance too. Some fire partition systems are tested for both; we confirm the combination.
Rated partitions need fire-stopping inspected before ceilings close. We plan inspection points into the fit-out programme.
Non-rated partitions on the same floor can be matched in profile and finish.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Coverage around Atherton includes the M46, M29, BL5, WN7 districts and nearby Tyldesley, Westhoughton, Leigh. Atherton is about 18 km from Manchester, the largest town in our Greater Manchester coverage.
After survey you get a fixed written quote for the agreed scope, so Atherton budgets are not open-ended.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Every quote in Atherton identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Fire-rated glass partitions applies to many building types in Atherton, including schools and colleges and industrial units.
Yes. We can supply and install the rated glazing package within a wider fit-out, working to your programme.
Some butt-jointed systems are tested for fire. See our frameless fire-rated glazing service for what is possible.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Survey timing in Atherton depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Butt-jointed fire glass walls with minimal frames.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Atherton to measure, record existing marks and check the frames and substrate.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.