EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Surrey · KT22
Leatherhead fire-rated glass floors
Fire-rated glass floors in Leatherhead is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
REI 30 – 60KT22England
Quote for Leatherhead
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-rated glass floors in Leatherhead
Fire-rated glass floors and horizontal rooflights are specialist systems with limited sizes and tested frames. We supply and install them where the evidence matches your span, load and rating, and coordinate the structural support with your engineer.
- Horizontal fire-rated rooflights
- Coordination with the structural engineer
- Handover evidence
- Anti-slip surface treatments within the system
How we work in Leatherhead
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Rated systems, not just rated glass
Every quote in Leatherhead identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Leatherhead budgets are not open-ended.
What to check before ordering fire-rated glass floors in Leatherhead
Programme
Glass floors are made to order with longer lead times; we plan early with your contractor.
Slip resistance
Walk-on glass needs an anti-slip finish; it must be one covered by the system.
Privacy
Obscured or patterned surfaces can be specified within the system for privacy below.
Areas we cover around Leatherhead
Survey visits can be arranged anywhere in Leatherhead, including the KT22, KT21, KT23, KT18 districts, and in nearby Epsom, Ewell, Esher. Leatherhead lies roughly 16 km from Woking, within our Surrey coverage.
Glass floors in EpsomGlass floors in EwellGlass floors in EsherGlass floors in BansteadGlass floors in Surbiton
England regulations that shape the job
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Leatherhead building types
Fire-rated glass floors applies to many building types in Leatherhead, including care homes and blocks of flats.
Fire-Rated Glass Floors: Leatherhead questions
What does REI mean?
R is load-bearing capacity, E is integrity and I is insulation. A floor needs R because it carries people and loads.
Can we see through it?
Yes, with clear glass and an anti-slip finish, or obscured if privacy is needed.
Do you work on occupied buildings in Leatherhead?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Do you carry out fire-rated glass floors in Leatherhead?
Yes. We survey and install in Leatherhead and across Surrey, including the KT22 district and nearby Epsom.
Related
Related services in Leatherhead
up to EI 120
Steel Fire-Rated Screens
Slim steel frames for long spans, high ratings and heavy glass.
Learn more →
E · EW · EI
Fire Glazing Surveys
Surveys that identify what fire glazing you have and what needs fixing.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
How a Leatherhead job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Site visit
A survey in Leatherhead confirms sizes, access, existing evidence and fixing conditions.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.