Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Hampshire · PO5

Portsmouth fire-rated glass floors

From the PO5 district outwards, we arrange fire-rated glass floors for buildings across Portsmouth, matching glass, frames and seals to tested evidence rather than guesswork.

REI 30 – 60PO5England

Quote for Portsmouth

Tell us what you need. We reply with next steps and a guide price.

What our fire-rated glass floors service includes in Portsmouth

Fire-rated glass floors and horizontal rooflights are specialist systems with limited sizes and tested frames. We supply and install them where the evidence matches your span, load and rating, and coordinate the structural support with your engineer.

  • Horizontal fire-rated rooflights
  • Coordination with the structural engineer
  • Steel support frames to the tested details
  • Anti-slip surface treatments within the system

Before you order fire-rated glass floors: what matters

Load and fire together

A glass floor must carry its design load during the fire period. Only systems tested for both should be used.

Slip resistance

Walk-on glass needs an anti-slip finish; it must be one covered by the system.

Privacy

Obscured or patterned surfaces can be specified within the system for privacy below.

Where we work around Portsmouth

We cover Portsmouth and the surrounding postcode districts, including PO5, PO1, PO4, PO2, PO12, PO3. Nearby towns we also serve include Gosport, Fareham, Ryde. Portsmouth is about 25 km from Southampton, the largest town in our Hampshire coverage.

What every Portsmouth quote includes

England rules applied

Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.

Honest about unknowns

If an existing frame in a Portsmouth building has no traceable evidence, we say so and price the options rather than guess.

Rated systems, not just rated glass

Every quote in Portsmouth identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Which rules apply to fire-rated glass floors in Portsmouth?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Building types we cover in Portsmouth

Sector guides below cover schools and colleges, blocks of flats and other buildings in Portsmouth.

Fire-Rated Glass Floors: Portsmouth questions

Can we see through it?

Yes, with clear glass and an anti-slip finish, or obscured if privacy is needed.

Can a glass floor be fire-rated?

Yes, using specialist tested systems that cover load-bearing capacity as well as integrity and insulation.

Which rules apply to fire-rated glazing in Portsmouth?

Building work in Portsmouth follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Do you carry out fire-rated glass floors in Portsmouth?

Yes. We survey and install in Portsmouth and across Hampshire, including the PO5 district and nearby Gosport.

Related

Related services in Portsmouth

E · EW · EI

Fire Glazing Surveys

Surveys that identify what fire glazing you have and what needs fixing.

Learn more →
E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

How a Portsmouth job runs

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Measure and check

We measure each opening in Portsmouth and check what the existing frames can accept.

Written quote

You receive a written quote naming the tested system and classification.

Install and hand over

Installation to the system details, then a handover pack with photographs and evidence.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote