Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Fire-rated glass floors in Ilford is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
A fire-rated glass floor is a walk-on glazed floor panel, set in a tested support frame, that keeps both its load-bearing capacity and its fire resistance for a stated time. Because a floor carries load, its classification also includes R for load-bearing capacity alongside integrity and insulation.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Every quote in Ilford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
If an existing frame in a Ilford building has no traceable evidence, we say so and price the options rather than guess.
Walk-on glass needs an anti-slip finish; it must be one covered by the system.
Obscured or patterned surfaces can be specified within the system for privacy below.
Tested floor panels have maximum spans. Larger openings are divided by a supporting grid.
We cover Ilford and the surrounding postcode districts, including IG1, E12, IG3, IG2, IG11, IG4. Nearby towns we also serve include Barking, Becontree, Leytonstone. Ilford sits within our Greater London coverage, alongside Barking.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Sector guides below cover retail and leisure units, student accommodation and other buildings in Ilford.
Each system sets maximum panel sizes; larger areas are divided by a supporting grid.
Yes, using specialist tested systems that cover load-bearing capacity as well as integrity and insulation.
Yes. We survey and install in Ilford and across Greater London, including the IG1 district and nearby Barking.
Building work in Ilford follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Ilford and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.