Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Somerset · BS48

Frameless Fire-Rated Glazing in Nailsea, Somerset

We provide frameless fire-rated glazing in Nailsea and across Somerset, working from the classification your building needs and handing over the evidence that proves what was fitted.

E 30 – EI 60BS48England

Quote for Nailsea

Tell us what you need. We reply with next steps and a guide price.

What our frameless fire-rated glazing service includes in Nailsea

Frameless fire glazing only works within tight, tested limits: specific glass types, joint widths, sealants, channel details and maximum heights. We specify it where the evidence supports your layout, and tell you plainly when a slim framed system is the better route.

  • Head, base and wall channels to the system details
  • Frameless-look fire doors where tested
  • Tested butt-jointed insulating or integrity glass systems
  • Handover evidence

What you can expect in Nailsea

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Rated systems, not just rated glass

Every quote in Nailsea identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Honest about unknowns

If an existing frame in a Nailsea building has no traceable evidence, we say so and price the options rather than guess.

Key checks for Nailsea projects

Doors

True frameless fire doors are rare; most frameless walls use a slim framed door within the run. We show you the options on drawings.

Height and corners

Maximum heights and the ability to form corners vary by system. Corners may need a post or a specific tested joint.

The joint is part of the test

The sealant, joint width and any interlayer in the joint come from the test. Generic silicone in a fire glass joint is not acceptable.

Nailsea coverage and nearby towns

We cover Nailsea and the surrounding postcode districts, including BS48, BS20. Nearby towns we also serve include Portishead, Clevedon, Bristol. Bath, around 28 km from Nailsea, is the largest town in the same coverage area.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Sectors we cover in Nailsea

We can survey and quote for hotels, retail and leisure units and other building types in Nailsea.

Questions about frameless fire-rated glazing in Nailsea

Is frameless fire-rated glass possible?

Yes, using tested butt-jointed systems, usually with insulating glass. It must be installed exactly to the tested details.

How tall can frameless fire glass go?

Each system states a maximum height. We check your floor-to-ceiling height against it during design.

How quickly can you survey in Nailsea?

Survey timing in Nailsea depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.

Can you price frameless fire-rated glazing in Nailsea from photos?

We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.

Related

Related services in Nailsea

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

How a Nailsea job runs

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Survey

We visit Nailsea to measure, record existing marks and check the frames and substrate.

Quote and evidence

Your quote lists each item with its classification and the evidence it relies on.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote