Fire-Rated Glass Partitions
Office glass partitions where the wall has to be fire-resisting.
Learn more →For York buildings, we supply, replace and check frameless fire-rated glazing wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
Frameless fire glazing only works within tight, tested limits: specific glass types, joint widths, sealants, channel details and maximum heights. We specify it where the evidence supports your layout, and tell you plainly when a slim framed system is the better route.
Every quote in York identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in York around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so York budgets are not open-ended.
The sealant, joint width and any interlayer in the joint come from the test. Generic silicone in a fire glass joint is not acceptable.
True frameless fire doors are rare; most frameless walls use a slim framed door within the run. We show you the options on drawings.
Frameless fire glazing is at the top of the price range because of the glass and precision required.
Our North Yorkshire coverage takes in York (YO1, YO10, YO31, YO24) and the neighbouring towns of Selby, Harrogate, Goole. York is the largest town in our North Yorkshire coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Sector guides below cover student accommodation, healthcare buildings and other buildings in York.
Usually through a slim framed door set into the run, chosen so the combination is covered by evidence.
Each system states a maximum height. We check your floor-to-ceiling height against it during design.
Yes. We survey and install in York and across North Yorkshire, including the YO1 district and nearby Selby.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Office glass partitions where the wall has to be fire-resisting.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
A survey in York confirms sizes, access, existing evidence and fixing conditions.
We set out the system, glass, evidence and programme, with a fixed price.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.