Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Leicestershire · LE16

Frameless Fire-Rated Glazing across Market Harborough

For Market Harborough buildings, we supply, replace and check frameless fire-rated glazing wherever the fire strategy depends on it, working to the tested system rather than the glass alone.

E 30 – EI 60LE16England

Quote for Market Harborough

Tell us what you need. We reply with next steps and a guide price.

What our frameless fire-rated glazing service includes in Market Harborough

Frameless fire glazing only works within tight, tested limits: specific glass types, joint widths, sealants, channel details and maximum heights. We specify it where the evidence supports your layout, and tell you plainly when a slim framed system is the better route.

  • Handover evidence
  • Head, base and wall channels to the system details
  • Rated sealant joints
  • Frameless-look fire doors where tested

How we work in Market Harborough

Honest about unknowns

If an existing frame in a Market Harborough building has no traceable evidence, we say so and price the options rather than guess.

Rated systems, not just rated glass

Every quote in Market Harborough identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

England rules applied

Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.

Before you order frameless fire-rated glazing: what matters

Protection on site

Frameless glass is exposed during the build. We plan protection until other trades finish.

Doors

True frameless fire doors are rare; most frameless walls use a slim framed door within the run. We show you the options on drawings.

Cost

Frameless fire glazing is at the top of the price range because of the glass and precision required.

Where we work around Market Harborough

Our Leicestershire coverage takes in Market Harborough (LE16) and the neighbouring towns of Corby, Kettering, Wigston. Market Harborough lies roughly 23 km from Leicester, within our Leicestershire coverage.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Building types we cover in Market Harborough

Frameless fire-rated glazing applies to many building types in Market Harborough, including hotels and industrial units.

FAQs for Market Harborough

Is frameless more expensive than framed?

Yes, typically. It also needs more careful site protection.

How tall can frameless fire glass go?

Each system states a maximum height. We check your floor-to-ceiling height against it during design.

Which rules apply to fire-rated glazing in Market Harborough?

Building work in Market Harborough follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

How quickly can you survey in Market Harborough?

Survey timing in Market Harborough depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.

Related

Related services in Market Harborough

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

From enquiry to handover in Market Harborough

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Measure and check

We measure each opening in Market Harborough and check what the existing frames can accept.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote