Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Looking for fire-rated fanlights and side panels in Portishead? We survey, supply and install tested fire-rated glazing for blocks of flats, public buildings and other buildings in and around Portishead, including the BS20 postcode district.
Tell us what you need. We reply with next steps and a guide price.
These panels are common in flat entrance doors, communal corridors, schools and older buildings, and they are often found glazed with ordinary glass. We survey them, replace unsuitable glass, correct beads and seals, and supply complete rated frames where the existing frame cannot be upgraded.
Side panels near doors fall in critical locations for impact safety, so the fire glass must also have the right impact classification.
Fanlights and side panels can be missed when fire doors are upgraded, leaving ordinary glass beside a new fire door.
Internal windows between rooms and corridors are a frequent survey finding in older offices and schools.
Our Somerset coverage takes in Portishead (BS20) and the neighbouring towns of Nailsea, Clevedon, Bristol. Bath, around 31 km from Portishead, is the largest town in the same coverage area.
Every quote in Portishead identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Portishead around residents, staff or pupils, with out-of-hours options.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
We can survey and quote for blocks of flats, public buildings and other building types in Portishead.
Yes. Glass within 300mm of a door edge and below 1500mm is a critical location for impact safety.
If the wall or door assembly is fire-resisting, yes. Ordinary glass above or beside a fire door creates a weak point.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Building work in Portishead follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Replacement and new vision panels fitted to the door's evidence.
Learn more →Hardwood screens and borrowed lights tested for fire.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →Replace old Georgian wired glass with modern fire glass.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Portishead and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.