Fire-Rated Windows
Windows near boundaries and protected routes, tested for fire.
Learn more →Fire-rated curtain walling in Nailsea is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Fire-rated curtain walling is a glazed facade system tested to resist fire, used where an external wall has to stop fire spreading to a neighbouring building, between floors, or past a protected stair or lobby. It combines facade performance, such as weather tightness and thermal values, with a fire classification.
Survey visits can be arranged anywhere in Nailsea, including the BS48, BS20 districts, and in nearby Portishead, Clevedon, Bristol. Bath, around 28 km from Nailsea, is the largest town in the same coverage area.
Work on higher-risk residential buildings in England goes through the Building Safety Regulator, which needs full product evidence at the design stage.
Fire-rated units can still meet thermal targets when specified correctly; we confirm U-values with the system supplier.
In England, materials in the external walls of relevant buildings 18 metres or more in height are restricted. We coordinate with the facade designer on every component.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Every quote in Nailsea identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Nailsea around residents, staff or pupils, with out-of-hours options.
If an existing frame in a Nailsea building has no traceable evidence, we say so and price the options rather than guess.
Sector guides below cover public buildings, hotels and other buildings in Nailsea.
Yes. External fire-rated glazing is usually supplied as a sealed unit with the fire pane in a tested position.
Typically where the facade is near a boundary, where it encloses a protected stair or lobby, or where fire spread between floors has to be controlled. The fire strategy sets the requirement.
Building work in Nailsea follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Windows near boundaries and protected routes, tested for fire.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We measure each opening in Nailsea and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.