Fire-Rated Windows
Windows near boundaries and protected routes, tested for fire.
Learn more →When a fire strategy, inspection report or building control comment in Whitehaven calls for glazing tested to resist fire, our fire-rated curtain walling service covers survey, supply and installation.
Tell us what you need. We reply with next steps and a guide price.
Fire-rated curtain walling is a glazed facade system tested to resist fire, used where an external wall has to stop fire spreading to a neighbouring building, between floors, or past a protected stair or lobby. It combines facade performance, such as weather tightness and thermal values, with a fire classification.
The gap between the curtain wall and each floor slab needs fire-stopping designed with the facade, not added afterwards.
Work on higher-risk residential buildings in England goes through the Building Safety Regulator, which needs full product evidence at the design stage.
External walls close to a boundary may need to be fire-resisting with limited unprotected areas. Fixed glazing that meets the wall's full fire-resistance requirement, including insulation where required, is not counted as unprotected area, so it can let you keep glass in those positions.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Our Cumbria coverage takes in Whitehaven (CA28, CA24) and the neighbouring towns of Workington, Barrow-in-Furness, Carlisle. Carlisle, around 57 km from Whitehaven, is the largest town in the same coverage area.
You receive the classification references, glass marks and installation photographs for your fire safety records.
We can phase work in Whitehaven around residents, staff or pupils, with out-of-hours options.
Every quote in Whitehaven identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Fire-rated curtain walling applies to many building types in Whitehaven, including hotels and offices.
Typically where the facade is near a boundary, where it encloses a protected stair or lobby, or where fire spread between floors has to be controlled. The fire strategy sets the requirement.
Yes. External fire-rated glazing is usually supplied as a sealed unit with the fire pane in a tested position.
Yes. We survey and install in Whitehaven and across Cumbria, including the CA28 district and nearby Workington.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Windows near boundaries and protected routes, tested for fire.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Whitehaven to measure, record existing marks and check the frames and substrate.
You receive a written quote naming the tested system and classification.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.