Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →We provide aluminium fire-rated screens in South Shields and across Tyne and Wear, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
Aluminium softens at a lower temperature than steel, so fire-rated aluminium systems rely on specific internal inserts, reinforcements and glazing details. We install only the tested system as a whole, in anodised or powder-coated finishes, with doors and side panels where the evidence allows.
If an existing frame in a South Shields building has no traceable evidence, we say so and price the options rather than guess.
Every quote in South Shields identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in South Shields around residents, staff or pupils, with out-of-hours options.
Aluminium systems are commonly available at 30 and 60 minutes; higher ratings are less common and may point to a steel system instead.
Head details and fixing centres come from the system documentation, especially beneath long-span slabs.
Aluminium fire screens can be visually matched to non-rated partitions elsewhere, so a floor reads as one design while only some walls are fire-rated.
Coverage around South Shields includes the NE33, NE29, NE30, NE34, NE32 districts and nearby Tynemouth, North Shields, Jarrow. South Shields is about 12 km from Newcastle upon Tyne, the largest town in our Tyne and Wear coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We can survey and quote for public buildings, care homes and other building types in South Shields.
Some systems are tested for external use. If the screen forms part of the building envelope we specify an external-rated system and glass.
30 and 60-minute ratings are common, in integrity or insulation classes depending on the glass. We confirm availability for the sizes you need.
Yes. We survey and install in South Shields and across Tyne and Wear, including the NE33 district and nearby Tynemouth.
Survey timing in South Shields depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Office glass partitions where the wall has to be fire-resisting.
Learn more →Facade glazing tested for fire where boundaries or compartments demand it.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
A survey in South Shields confirms sizes, access, existing evidence and fixing conditions.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.