Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Aluminium fire-rated screens in Redcar is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Aluminium fire-rated screens are glazed walls built from aluminium profiles that have been tested with fire-resistant glass and insulating inserts. They suit offices, healthcare and education buildings that want a clean, modern frame matching the rest of the glazing.
After survey you get a fixed written quote for the agreed scope, so Redcar budgets are not open-ended.
Every quote in Redcar identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Aluminium systems are commonly available at 30 and 60 minutes; higher ratings are less common and may point to a steel system instead.
Head details and fixing centres come from the system documentation, especially beneath long-span slabs.
Some aluminium systems are tested for external facades, others for internal use only. We match the system to the position.
Whether the building is in central Redcar or the wider TS10, TS11 districts, we can survey and quote. We also cover Middlesbrough, Hartlepool, Billingham. York, around 73 km from Redcar, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Aluminium fire-rated screens applies to many building types in Redcar, including industrial units and retail and leisure units.
30 and 60-minute ratings are common, in integrity or insulation classes depending on the glass. We confirm availability for the sizes you need.
Some systems are tested for external use. If the screen forms part of the building envelope we specify an external-rated system and glass.
Yes. We survey and install in Redcar and across North Yorkshire, including the TS10 district and nearby Middlesbrough.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Office glass partitions where the wall has to be fire-resisting.
Learn more →Facade glazing tested for fire where boundaries or compartments demand it.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We measure each opening in Redcar and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.