Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Our aluminium fire-rated screens service covers Andover and neighbouring areas such as Winchester and Newbury, with every job built around a tested system.
Tell us what you need. We reply with next steps and a guide price.
Aluminium fire-rated screens are glazed walls built from aluminium profiles that have been tested with fire-resistant glass and insulating inserts. They suit offices, healthcare and education buildings that want a clean, modern frame matching the rest of the glazing.
Survey visits can be arranged anywhere in Andover, including the SP10, SP11 districts, and in nearby Winchester, Newbury, Salisbury. Andover lies roughly 35 km from Southampton, within our Hampshire coverage.
Head details and fixing centres come from the system documentation, especially beneath long-span slabs.
Aluminium systems are commonly available at 30 and 60 minutes; higher ratings are less common and may point to a steel system instead.
Hinges, locks and closers fitted to doors within the screen must be compatible with the door's evidence.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We can phase work in Andover around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Andover budgets are not open-ended.
Every quote in Andover identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Sector guides below cover blocks of flats, industrial units and other buildings in Andover.
Some systems are tested for external use. If the screen forms part of the building envelope we specify an external-rated system and glass.
Usually they can be matched closely in profile and colour so rated and non-rated areas look consistent.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Building work in Andover follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Office glass partitions where the wall has to be fire-resisting.
Learn more →Facade glazing tested for fire where boundaries or compartments demand it.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Andover to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.