Fire Glazing Surveys
Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Fire glazing remedial works in Welwyn Garden City is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Fire glazing remedial works are the repairs and replacements that bring glazed fire-resisting elements back into line with their required performance: replacing unsuitable glass, refitting beads and seals, sealing service penetrations, and replacing frames that cannot be shown to be rated.
We plan remedial programmes around residents, pupils or staff, with phasing and clear communication.
Intumescent strips painted over during redecoration can be replaced without changing the glass.
Remedial glass and seals must suit the existing frame's evidence. Where that evidence is missing, we raise it before work starts.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Survey visits can be arranged anywhere in Welwyn Garden City, including the AL8, AL7, AL6, AL10 districts, and in nearby Hatfield, Hertford, St Albans. Welwyn Garden City lies roughly 21 km from Watford, within our Hertfordshire coverage.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
After survey you get a fixed written quote for the agreed scope, so Welwyn Garden City budgets are not open-ended.
We can phase work in Welwyn Garden City around residents, staff or pupils, with out-of-hours options.
Sector guides below cover industrial units, public buildings and other buildings in Welwyn Garden City.
Yes. Send the report and we will price the glazing-related actions item by item.
Yes. We prioritise by risk and agree phases with you.
Yes. We survey and install in Welwyn Garden City and across Hertfordshire, including the AL8 district and nearby Hatfield.
Building work in Welwyn Garden City follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Cracked or broken fire glass replaced to the original specification.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Welwyn Garden City and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.