Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →If a building in Dundee needs fire glass replacement, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
We identify the existing glass from its marks, measure the opening, make the area safe and fit the correct replacement. If the original product is no longer made, we source an alternative covered by the frame's evidence or advise on the right next step.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
Our Tayside coverage takes in Dundee (DD1, DD4, DD6) and the neighbouring towns of Arbroath, Perth, Glenrothes. Dundee is the largest town in our Tayside coverage.
If an existing frame in a Dundee building has no traceable evidence, we say so and price the options rather than guess.
We can phase work in Dundee around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Dundee budgets are not open-ended.
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Sector guides below cover healthcare buildings, blocks of flats and other buildings in Dundee.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Dundee is in Scotland, so work needs a building warrant and follows the Building Standards Technical Handbooks, with the Fire (Scotland) Act 2005 covering occupied premises.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We measure each opening in Dundee and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.