Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →When a fire strategy, inspection report or building control comment in Paisley calls for glazing tested to resist fire, our fire glass replacement service covers survey, supply and installation.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
Coverage around Paisley includes the PA1, PA2, PA3, PA5, G53 districts and nearby Renfrew, Clydebank, Newton Mearns. Paisley is the main town we cover in Renfrewshire and Inverclyde.
EI glass is laminated to size, so it can take longer to supply than integrity glass. We give you a realistic date.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Scottish guidance has its own approach to escape routes and compartmentation, so glazing designs are checked against the Technical Handbooks and the warrant drawings.
After survey you get a fixed written quote for the agreed scope, so Paisley budgets are not open-ended.
Designs follow the building and fire safety rules that apply in Scotland, not a one-size-fits-all approach.
We can phase work in Paisley around residents, staff or pupils, with out-of-hours options.
Sector guides below cover care homes, retail and leisure units and other buildings in Paisley.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Paisley and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.