Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →When a fire strategy, inspection report or building control comment in Havant calls for glazing tested to resist fire, our fire glass replacement service covers survey, supply and installation.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
A broken pane can be a cut hazard and a gap in compartmentation. We can make it safe on the first visit while the replacement is cut.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We cover Havant and the surrounding postcode districts, including PO9, PO10. Nearby towns we also serve include Waterlooville, Portsmouth, Gosport. Havant is about 30 km from Southampton, the largest town in our Hampshire coverage.
We can phase work in Havant around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Havant budgets are not open-ended.
Every quote in Havant identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Sector guides below cover industrial units, schools and colleges and other buildings in Havant.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
It may not perform as tested. Treat it as a defect and arrange replacement promptly.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Building work in Havant follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
A survey in Havant confirms sizes, access, existing evidence and fixing conditions.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.