Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →We provide fire glass replacement in Salford and across Greater Manchester, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
EI glass is laminated to size, so it can take longer to supply than integrity glass. We give you a realistic date.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
Coverage around Salford includes the M6, M5, M50, M17, M7, M30 districts and nearby Eccles, Old Trafford, Manchester. Manchester, around 4 km from Salford, is the largest town in the same coverage area.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Every quote in Salford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
If an existing frame in a Salford building has no traceable evidence, we say so and price the options rather than guess.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Fire glass replacement applies to many building types in Salford, including blocks of flats and care homes.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Survey timing in Salford depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We measure each opening in Salford and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.