Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →For Cheadle Hulme buildings, we supply, replace and check fire glass replacement wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
EI glass is laminated to size, so it can take longer to supply than integrity glass. We give you a realistic date.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
Survey visits can be arranged anywhere in Cheadle Hulme, including the SK8, SK7, SK2, SK1, SK3, M22 districts, and in nearby Stockport, Hazel Grove, Wilmslow. Manchester, around 12 km from Cheadle Hulme, is the largest town in the same coverage area.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
If an existing frame in a Cheadle Hulme building has no traceable evidence, we say so and price the options rather than guess.
We can phase work in Cheadle Hulme around residents, staff or pupils, with out-of-hours options.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We can survey and quote for industrial units, hotels and other building types in Cheadle Hulme.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Building work in Cheadle Hulme follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Cheadle Hulme to measure, record existing marks and check the frames and substrate.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.