Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →If a building in Mangotsfield needs fire glass replacement, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
A broken pane can be a cut hazard and a gap in compartmentation. We can make it safe on the first visit while the replacement is cut.
EI glass is laminated to size, so it can take longer to supply than integrity glass. We give you a realistic date.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Coverage around Mangotsfield includes the BS16, BS7, BS15, BS5, BS36, BS0 districts and nearby Kingswood, Bristol, Yate. Gloucester, around 46 km from Mangotsfield, is the largest town in the same coverage area.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
We can phase work in Mangotsfield around residents, staff or pupils, with out-of-hours options.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Sector guides below cover offices, blocks of flats and other buildings in Mangotsfield.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Survey timing in Mangotsfield depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We visit Mangotsfield to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.