Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →We provide fire glass replacement in Chester and across Cheshire, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
EI glass is laminated to size, so it can take longer to supply than integrity glass. We give you a realistic date.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
Survey visits can be arranged anywhere in Chester, including the CH1, CH88, CH70 districts, and in nearby Hawarden, Deeside, Ellesmere Port. Chester is about 31 km from Warrington, the largest town in our Cheshire coverage.
After survey you get a fixed written quote for the agreed scope, so Chester budgets are not open-ended.
You receive the classification references, glass marks and installation photographs for your fire safety records.
We can phase work in Chester around residents, staff or pupils, with out-of-hours options.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Fire glass replacement applies to many building types in Chester, including industrial units and public buildings.
It may not perform as tested. Treat it as a defect and arrange replacement promptly.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Yes. We survey and install in Chester and across Cheshire, including the CH1 district and nearby Hawarden.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
A survey in Chester confirms sizes, access, existing evidence and fixing conditions.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.